Accepting A Call; Forwarding A Call; Rejecting A Call; Rejecting All Calls (Do Not Disturb) - Swisscom Pronto 32i Manual

20.5.99
Outgoing and incoming calls

Accepting a call

or
Loudspeaker

Forwarding a call

Forward call
or

Rejecting a call

Rejecting all calls (do not disturb)

Do not disturb
40
KAP08.FM5
The Pronto 32i rings with a particular call signal (
18).The number of the caller is shown in the display. The
name of the caller is displayed if it is stored in the
Pronto 32i telephone directory.
You can conduct the call via the handset or you can acti-
vate the handsfree function (
Alternatively, you can reject the call.
Call signal sounds.
The directory number and name of the caller are dis-
played, if possible.
c or
Lift the handset, confirm "Accept call?", or press the
?
"Loudspeaker" key to talk handsfree; LED lights up.
You are connected to the calling party.
This service is not yet available!
and
Select "Forward call?" and confirm or press the
<> ?
"Forward call" key; LED flashes.
The directory number of the last call forwarding is dis-
played.
The directory number can be deleted by pressing the
backspace key
Confirm; the LED of the "Forward call" key goes out.
?
The caller was forwarded to the selected number.
and
Select "Reject call?" and confirm.
<> ?
The caller hears a corresponding message from the
switching system.
The directory number, if known, is transferred to the call
list.
At times, you can reject calls to your Pronto 32i while you
nonetheless continue to make calls. In this case, you
must have programmed a key with the "do not disturb"
function (
the associated LED is lit.
To activate the function, press the "Do not disturb" key;
LED lights up.
All calls are then rejected. If the "Info text" function is ac-
tivated (
the caller's display (if available).
Pronto 32i, englisch: A30853-X300-F507-1-7619
page 46).
and re-entered with
<
page 34). The setting is active for as long as
page 22), a predefined info text will appear in
page
o
( page 56).