Locking Your Telephone; Only Direct Station Selection Numbers Can Be Dialed (Babyphone); Programmed Lockout Numbers Cannot Be Dialed - Swisscom Pronto 32i Manual

Isdn phone
Table of Contents

Advertisement

20.5.99
Convenient and secure telephone communication

Locking your telephone

Only direct station selection numbers can be dialed (Babyphone)

Programmed lockout numbers cannot be dialed

c or
Loudspeaker
50
KAP09.FM5
The actual identification is performed by Swiss-
com. The calling party's number, the time and
the date are recorded. A printout of the list is is-
sued later.
You can lock your Pronto 32i against unauthorised use:
With direct station selection (Babyphone), only the
preprogrammed direct station selection number can
be dialed (Programming direct station selection:
page 26, Locking the telephone with direct station
selection:
With a total lock, only the two emergency call num-
bers can be dialed (Programming emergency num-
bers:
page 25).
Dialing restrictions based on barred code lists.
You can activate as many as nine different barred
code lists (
sible to dial any numbers which begin with the
number sequence specified in a barred code list (e.g.
international numbers, 0190 numbers, etc.).
Prerequisite: Direct station selection is programmed and
activated (
"Direct stn selection" appears in the status line of the dis-
play.
c oro or
Lift the handset or press any key on the keypad or any
function key.
The programmed direct station selection number is di-
aled.
Prerequisite: The lockout numbers are programmed and
the lock is activated.
Lift the handset or press the "Loudspeaker" key.
Enter a directory number which is not a lockout number.
o
If you enter a lockout number, an acoustic alarm
sounds and the display shows
"Number barred".
Pronto 32i, englisch: A30853-X300-F507-1-7619
page 26).
page 25, Activating/deactivating a total lock:
page 24). This means that it is not pos-
page 26).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pronto 32i and is the answer not in the manual?

Questions and answers

Table of Contents