Self-Help In The Event Of A Fault - Swisscom Pronto 32i Manual

20.5.99

Self-help in the event of a fault

Symptom
No display
No dial tone
No ringing tone
With PBX operation:
No or incorrect connection
after dialing from memory.
The password entered is re-
jected.
KAP02.FM5
Important information for installation and operation
The cause of an operating error need not necessarily lie
with the device. You may save time and money by rectify-
ing simple faults yourself. The following information
should be of help.
Cause
No power supply
No power supply
Handset cord not connected
correctly.
Loudspeaker volume off
Trunk code not set.
Password entered incorrect-
ly.
Pronto 32i, englisch: A30853-X300-F507-1-7619
Action
Check that the telephone connect-
ing cord has been inserted correct-
ly in the device and in the ISDN
socket. Check the NT plug-in con-
nection with the power network.
Check that the NT is live.
Check the plug-in connections of
the telephone connecting cord on
the device, the ISDN socket, and
the NT.
Check the plug-in connections of
the handset cord on the device and
on the handset.
Set the loudspeaker volume,
page 18.
Program the trunk code,
page 15.
Try again.
If you have forgotten your pass-
word, contact Swisscom Service.
3