Clearing Memory; Restoring The As-Supplied Condition - Swisscom Pronto 32i Manual

20.5.99

Clearing memory

> Service?

Restoring the as-supplied condition

Service?
>
KAP05.FM5
Programming the telephone settings
You can clear any or all of these memories:
Charge meter (summation meter)
Locks
Destination dialing
Telephone directory
The "Clear memory" command can be used to delete the
following settings and memories in one go:
Redial key, call list, telephone directory, destination di-
aling key , summation meter, emergency numbers 1
and 2, lockout numbers, direct station selection and
total locks.
? >
3=local functions?
4 Press key "4".
o
and
With password protection (
?
word.
and
<> ? Select the memory you want to clear.
The "clear memory?" selection deletes all above-men-
tioned settings and memories.
<> Select "Clear?" (this additional query is output to prevent
inadvertent deletion).
? Confirm. The memory is cleared.
The Pronto 32i can be reset to the factory settings.
? > 3=local functions?
4 Press key "4".
o
and With password protection (
?
word.
>
6=as-supplied condition?
<> Select "Set?" (this additional query is output to prevent in-
advertent deletion of individual settings).
? Confirm. The as-supplied condition is restored.
Pronto 32i, englisch: A30853-X300-F507-1-7619
? >
page 14): Enter the pass-
? >
page 14): Enter the pass-
?
27