Step 5 (Only With Pbx Operation): Program The Trunk Code; Step 6: Try Out The Telephone - Swisscom Pronto 32i Manual

20.5.99

Step 5 (only with PBX operation): Program the trunk code

Step 6: Try out the telephone

KAP03.FM5
Press the ?
Keep pressing key
require appears.
Press the ?
h
Press when finished.
If you are operating your Pronto 32i on a telecommunica-
tions system (private branch exchange), you must pro-
gram a trunk code in accordance with the configuration of
the system.
Press the >
Service?
Press the ?
Press the >
2=configuration?
Press the ?
Press the >
15=external call?
Enter the trunk code using the keypad, e.g. 0 (depending
on your telecommunications system). Then press
h
Press when finished.
You can now try out your Pronto 32i!
To call a subscriber:
Lift the handset.
c
Enter the directory number.
o
The number is dialed.
To call yourself:
Lift the handset.
c
Enter the directory number.
o
The number is dialed.
The entry appears in your call list.
Pronto 32i, englisch: A30853-X300-F507-1-7619
Putting the system into operation
key.
> until the national code which you
key.
key until the lower display line shows:
>
key.
key until the lower display line shows:
>
key.
key until the lower display line shows:
>
? .
9