Changing Stored Users - Swisscom Pronto 32i Manual

20.5.99
Managing the telephone directory

Changing stored users

Telephone directory
30
KAP06.FM5
? Conclude your input.
o
Enter the name of the user. The rules for entering charac-
ters via the keypad apply here (
with .
<
and Decide which section of the telephone directory you
<> ?
want to store the user: Select "Private" or "General".
When you press
You can change stored user data.
Activate the telephone directory menu.
If you have divided your telephone directory into a general
and
<> ?
and a private section: Select "General?" or "Private?" or
"All?".
o
and If you selected "Private?" or "All?" and a password is con-
?
figured (
>
4=change entry?
and
<> ? Select the desired entry.
or
o
and
? Enter the name of the desired user to quickly access the
associated telephone directory entry. The rules for enter-
ing characters via the keypad apply here (
? Confirm "Change?".
o
Change the directory number of the user. Backspace with
.
<
In the case of users with ISDN numbers, you must al-
ways enter the area code (i.e. 031 for Bern) even if the
user has the same area code as you.
Conclude your input.
?
o
Change the name of the user. The rules for entering char-
acters via the keypad apply here (
with .
<
and
Decide which section of the telephone directory you
<> ?
want to store the user: Select "Private" or "General".
When you press
and
<> ? If you do not want to change any other entries: Select
"Cancel?".
You can also use the start of a user name to
change an entry, and then continue with
"Change?".
Pronto 32i, englisch: A30853-X300-F507-1-7619
page 28). Backspace
, the user is stored.
?
page 14): Enter your password.
?
page 28). Backspace
, the modified user data is stored.
?
page 28).