Nakanishi E3000 SELECTOR Operation Manual page 18

⑫ Air Input Joint
6mm Air Hose
with Filter
(4) CONTROLLER to SELECTOR Connections
CONTROLLER
Air Plug
( For Air Stop : 6）
CAUTION
・ Regulate the air supply 0.35MPa (50.8psi). If the air pressure is too low, the CONTROLLER will
not operate and an Error code will be generated.
・ When using SELECTOR, it is not necessary to supply the cooling air to CONTROLLER. Insert
the provided Air Plug (for air stoppage :
Output Joint.
SELECTOR
④
⑥
⑧
⑩
Fig. 18
Fig. 19
6) into the CONTROLLER'S Air Input Joint and Air
Air Output Joint
4mm cooling Air Hose
Air Output Joint
Air Output Joint
Air Output Joint
SELECTOR
Air Plug
( For Air Stop :
Connector Cap
for Motor Output
4）
45