Parameters - Siemens SINAMICS GL150 Operating Instructions Manual

Operation

8.2 Parameters

Danger when the permissible short-circuit currents are exceeded
Serious follow-on faults are possible, if the specified short-circuit current values are exceeded.
This can result in death, serious injury or material damage.
● Observe the maximum permitted short-circuit currents and maximum specified short-circuit
Damage caused by incorrect parameter assignment
Malfunctions can occur if you change parameters.
● Do not change the parameters, e.g. for the motor circuit-breaker.
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.2 Parameters
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and specific attributes. Such attributes are, for
example:
● Readable attributes
● Writable attributes
● BICO attributes
The parameters can be accessed via the following means:
● PC with commissioning tool via PROFIBUS
● Operator panel
Parameter types
The following parameters are available:
● Adjustable parameters (write/read)
108
times.
Adjustable parameters directly influence the response of a function, e.g. the ramp-up and
ramp-down time of a ramp-function generator.
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE