Siemens SINAMICS GL150 Operating Instructions Manual page 141

Two plug connectors are available on the thyristor electronics for connection to the thyristor and
the external circuitry. The mating connector is integrated at the mounting position of the
thyristor electronics.
If the thyristor electronics have to be replaced, proceed as follows:
Disconnecting the cables
To disconnect the cables, proceed as follows:
1. If there are no core end markings, label the two fiber-optic cables and the connected cables.
2. Remove all connecting leads.
3. Detach the two fiber-optic cables from the opto-receiver and opto-transmitter modules.
4. Pull out the fiber-optic cables.
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE
Maintenance
9.7 Repairs
141