O
PERATION
6Ch
Channel
Function
1
Red all
2
Green all
3
Blue all
4
Amber all
5
Dimmer
6
Strobe
4Ch
Channel
Function
1
Red all
2
Green all
3
Blue all
4
Amber all
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Connect the product to a suitable power outlet.
Static Colors
To run the 4BAR Flex Q in Preset Color mode, follow the instructions below:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select C 1–15.
4.
Press <ENTER>.
Automatic Programs
To run the 4BAR Flex Q in Automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select P 1–8.
4.
Press <ENTER>.
Automatic Speed
To change the auto program speed, follow the instructions below:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select S1–100.
4.
Press <ENTER>.
4BAR Flex Q User Manual Rev. 1
Value
Percent/Setting
000 255
0–100%
000 255
0–100%
000 255
0–100%
000 255
0–100%
000 255
0–100%
000 015
No function
016 255
Strobe, slow to fast
Value
Percent/Setting
000 255
0–100%
000 255
0–100%
000 255
0–100%
000 255
0–100%
Page 10 of 19