Mounting; Orientation; Rigging - Chauvet DJ 4BAR Flex Q User Manual

S
ETUP

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the

Orientation

The 4BAR Flex Q may be mounted in any position; however, make sure adequate ventilation is provided
around the product.

Rigging

• Before deciding on a location for the product, ensure that there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product's
weight. See the Technical Specifications
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Mounting Diagram
Mounting clamp (x2)
(Such as CLP-15 from Chauvet)
4BAR Flex Q User Manual Rev. 1
for weight information.
Safety cable
Pod pan adjustment
knob (x4)
Tripod
insertion
point
Safety
Hanging
bracket (x2)
Pod tilt adjustment
knob (x2 per pod)
Notes.
Page 6 of 19