Table of Contents
Advertisement
System
System Menu
Language
[Languages]
OSD
OSD time
OSD position
OSD transparency
OSD rotation
OSD last memory
Information OSD
Boot logo
Power management
Quick recovery
Human sensing
Human sensing
Sensor setting
Start time
Backlight
Volume
Network settings
IP setting
IP address
Subnet mask
Default gateway
Factory reset
Factory reset
Selects the language used by the OSD.
Turns off the OSD after a period of inactivity.
Determines the location where the OSD appears on the screen.
Makes the OSD partially transparent.
Determines the OSD orientation between landscape and portrait.
Landscape:
Shows the OSD in landscape orientation.
Portrait:
Shows the OSD in portrait orientation.
Opens the OSD menu to the last item changed before it closed.
Selects whether the signal information OSD is displayed or not. The signal information OSD will appear
when the input signal or input source changes.
The NEC logo is briefly displayed after the monitor is powered on.
Select the behavior of power saving mode.
Off:
Enables the most effective power saving mode.
On:
The monitor returns to On mode faster from power saving mode.
OTEE:
The power consumption is higher than [Off] setting (see
The sensor detects the movement of a person by using the [Human sensing] function. The [Human
sensing] function has three settings:
Off:
No human sensing.
On:
After no person has been detected for a period of time, the monitor shifts to power saving
mode automatically to reduce the power consumption. When a person comes near the monitor
again, the monitor will automatically return to normal mode.
Custom:
Allows you to choose what the [Backlight] and [Volume] conditions will be after no person has
been detected for a period of time.
Adjusts the threshold level of human sensing. The current threshold is shown to the right of the adjustment
slider. To adjust the sensor's distance threshold, use the [</>] key to move the slider left or right.
Detects a person within about 1.5 m from the monitor.
Adjusts the wait time before entering low brightness mode or power saving mode when the human sensor
detects no person.
Select the backlight setting when [Human sensing] is activated. This option is available when Human
Sensing is set to [Custom].
Select the volume setting when [Human sensing] is activated. This option is available when Human
Sensing is set to [Custom].
Configures the monitor's network settings either automatically or manually (see
Auto:
The IP address is automatically obtained from the DHCP server.
Manual:
The network settings must be entered manually. Contact the Network Administrator for this
information.
OTEE:
Consult your network administrator for the IP address when [Auto] is selected for [IP setting].
Set your IP address for the monitor connected to the network when [Manual] is selected for [IP setting].
Set your subnet mask data for the monitor connected to the network when [Manual] is selected for [IP
setting].
Set your default gateway for the monitor connected to the network when [Manual] is selected for [IP
setting].
OTEE:
Enter [0.0.0.0] to delete the setting.
All settings are returned to factory shipment state.
English−52
page
25).
page
34).
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiSync PA311D and is the answer not in the manual?
Questions and answers