Index WARNING ............................English-1 CAUTION .............................English-1 Registration Information .......................English-2 Recommended use ........................English-3 Safety Precautions and Maintenance ..................English-3 Ergonomics ..........................English-4 Cleaning the LCD Panel .......................English-4 Cleaning the Cabinet ......................English-4 Product Features ..........................English-5 Quick Start ............................English-5 Controls ............................English-11 Using the PICTURE MODE function ....................English-17 Advanced OSD ..........................English-18 Specifications ..........................English-26 Features ............................English-27...
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located.
WARNING: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turn off the monitor when not in use.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER, AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Ergonomics To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects).
Product Features • DisplayPort and HDMI, which support 10-bit color depth. • Five customizable easy-to-switch picture modes (see page 13). • Accurate color reproduction for high-end graphic design (see page 17). • Quick warmup time. • Picture-In-Picture/Picture-By-Picture dual-screen mode includes real-time preview (see page 14). •...
Page 8
3. Height adjustment is locked by a lock switch. Place a hand on top of the stand and push the screen down to the lowest position. Slide the lock switch to unlock the stand (Figure B.1). NOTE: Handle with care when unlocking the stand. Place your hands on each side of the monitor screen, tilt it to the maximum angle then lift it to the highest position (Figure B.2).
Page 9
5. Place the cables in the cable holder firmly and evenly (Figure C.2 and Figure C.3). 6. Please check that you can still raise and lower the monitor screen after you have installed the cables. Security Slot* DisplayPort Cable Power Cord Figure C.2 Power Cord DisplayPort Cable...
Page 10
8. Turn on the monitor by pressing the power button and then the computer (Figure E.1). 9. When using analog (VGA) input, No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. For further adjustments, use the following OSD controls: •...
Page 11
Place your hands on both sides of the monitor screen and adjust the swivel as desired (Figure TS.2). Figure TS.2 Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. Contact NEC for more information. To prepare the monitor for alternate mounting purposes: •...
Page 12
Mount the Flexible Arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how to Remove the Monitor Stand for Mounting to remove the stand. 2. Use the attached 4 screws to fasten the arm to the monitor (Figure F.1). 100 mm 100 mm Figure F.1...
Controls Many of the OSD controls are also available in the included MultiProfiler software, developed by NEC Display Solutions. The latest MultiProfiler software is available on the NEC Display Solutions website. OSD (On-Screen Display) control buttons on the front of the monitor function as follows: To open the OSD menu, press the MENU button.
Page 14
SETTING OSD LANGUAGE 1. Press the MENU button to open the OSD menu. 2. Press the LEFT/RIGHT button to navigate to the MENU TOOLS. 3. Press the UP/DOWN button to navigate to LANGUAGE, and then press the LEFT/RIGHT button to select the desired OSD language.
Page 15
FINE (Analog input only) Improves focus, clarity and image stability by increasing or decreasing this setting. If the “AUTO ADJUST” and “H.SIZE” functions do not give you a satisfactory picture setting, fine tuning can be performed by using the “FINE” function. A Moiré...
Page 16
Tools VOLUME Controls the volume of the speakers or headphones. To mute the sound output, press the “RESET” button. SOUND INPUT (HDMI, DisplayPort inputs only) Selects the sound input source. HDMI input: HDMI or ANALOG. DisplayPort input: DP or ANALOG. NOTE: Audio is not transmitted through the DVI connection.
Page 17
OFF MODE The Intelligent Power Manager allows the monitor to enter into a power saving mode after a period of inactivity. The OFF MODE has four settings. OFF: The monitor does not go into power save mode when the input signal is lost. STANDARD: The monitor enters power save mode automatically when the input signal is lost.
Page 18
HOT KEY You can adjust the VOLUME and PICTURE MODE directly. When this function is set to ON, you can adjust the VOLUME with “LEFT” or “RIGHT”, you can select the PICTURE MODE with “UP” or “DOWN”, while the OSD menu is off.
Medical settings for X-ray imaging view. Setting that conforms to the DICOM standard for the Grayscale Standard Display Function. PROGRAMMABLE For “MultiProfiler” software or the Hardware Calibration settings by NEC Display Solutions software (some OSD settings are disabled). *: Low Blue Light function substantially reduces blue light and helps to alleviate eye-strain.
Advanced OSD If you need detailed information about the controls, please use the advanced menu. There are 2 ways to access the advanced menu. Method 1: <To access the advanced menu> • Press the MENU button to access the OSD menu. Use the LEFT/RIGHT and UP/DOWN buttons to navigate to the ADVANCED SETTING in the Color Control Systems.
Page 21
GAMMA Allows you to manually select the brightness level of grayscale. There are five selections: sRGB, L Star, DICOM, PROGRAMMABLE and CUSTOM. sRGB: GAMMA setting for sRGB. L Star: GAMMA setting for eciRGB_v2 and Lab color space. DICOM: DICOM GSDF (Grayscale Standard Display Function) is typically used for medical imaging.
Page 22
UNIFORMITY This function electronically compensates for the slight variations in the white uniformity level as well as for deviations in color that may occur throughout the display area of the screen. These variations are characteristic of LCD panel technology. This function improves the color and evens out the luminance uniformity of the display.
Page 23
Tag5 H.POSITION Controls Horizontal Image Position within the display area of the LCD. Press “LEFT” or “RIGHT” to adjust. V.POSITION Controls Vertical Image Position within the display area of the LCD. Press “LEFT” or “RIGHT” to adjust. H.SIZE Adjusts the horizontal size of the screen. (Analog input only) If the “AUTO ADJUST”...
Page 24
SETTING BOOT LOGO* The NEC logo is briefly displayed after the monitor is powered on. This feature can be turned on or off in the OSD. Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGO menu will appear.
Page 25
RESOLUTION If ON is selected, a message will appear on the screen after 30 seconds, notifying you NOTIFIER* that the resolution is not the optimal resolution. HOT KEY* When this function is activated; the VOLUME of the monitor can be adjusted without entering the OSD menu by using the front buttons.
Page 26
TagA ROTATION OSD: AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is set to AUTO by default. LANDSCAPE: Display the OSD with landscape mode. PORTRAIT: Display the OSD with portrait mode. PICTURE1: AUTO: The left/up side or main window image automatically rotates according to the orientation of the display.
Page 27
CURRENCY Adjusts electricity prices-electric energy equivalent in the electrical rate saving CONVERT SETTING calculation. HOURS RUNNING* Shows total running time. TagC INFORMATION* Provides information about the current display resolution. Technical data, including the preset timing currently being used and the horizontal and vertical frequencies is also displayed. This item does not reset by FACTORY PRESET (Tag7).
60 Hz to 75 Hz 1280 x 1024* at 75 Hz 1600 x 1200* at 60 Hz NEC DISPLAY SOLUTIONS recommended resolution 1920 x 1200 at 60 Hz........... for optimal display performance. 1400 x 1050* at 60 Hz 1440 x 900*...
Features SpectraView Engine (SPECTRAVIEW ENGINE): This system is designed for improving the visual quality of the monitor. By making automatic adjustments during operation of the monitor hardware in real time, optimal settings are configured without any user interaction. DisplayPort: DisplayPort is designed to be a future-ready, scalable solution for high performance digital display connectivity. It enables the highest resolutions, the fastest refresh rates and deepest color depths over standard cables.
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use.
Page 31
Picture is not bright • Make sure ECO MODE and AUTO BRIGHTNESS are turned off. • If the brightness fluctuates, make sure AUTO BRIGHTNESS is turned off. • In PICTURE MODE, set HIGH BRIGHT. See page 17. • LCD brightness degradation occurs due to long-term usage or extreme cold conditions. •...
Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting conditions.
Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.