Table of Contents
Advertisement
Tools
Tools Menu
Area marker
Area marker
Size
Aspect
Color
Import / Export
Import / Export
Information
Info Menu
Monitor information
SpectraView engine status
USB information
System information
Shows a marker by a frame or line.
OTEE:
When a line marker is displayed for a long time, LCD panel may have image sticking phenomena.
To avoid it a frame marker is recommended.
Adjusts the size of the marker.
Adjusts the aspect ratio of the marker.
Selects the color of a line marker or the brightness of a frame marker.
Imports or exports the settings of your display to a USB storage device (see
OTEE:
•
The Import function will overwrite the current monitor settings. If needed, backup the current
settings using the export function before importing new settings.
• Some monitor specific settings, such as calibration records, are not exported.
• If the IP address is set manually, make sure it is a unique address and there is no duplicate on
the network.
Shows the model name, serial number, input signal and audio information for your monitor.
Shows the status of internal sensors and the calibration information for your monitor.
Shows the USB hub and USB-C data setting.
Shows the firmware version, SpectraView engine status, hours running, carbon savings, carbon usage
and MAC address of your monitor.
Hours running: Show total running time.
Carbon savings: Shows the estimated carbon saving information in kg-CO2. The carbon footprint factor in
the carbon saving calculation is based on the OECD (2008 Edition).
Carbon usage: Shows the estimated carbon usage information in kg-CO2. This is an arithmetic estimation,
not an actual measurement value. This estimation is based on the monitor settings only and does not
account for any connected devices.
English−54
page
36).
Advertisement
Table of Contents
