NEC MultiSync PA311D User Manual page 21

3. Connect devices to the monitor.
MDVSENSOR3


CAUTIO
E: Use the provided specified cables with this product so as not to interfere with radio and television
reception.
For DisplayPort, HDMI, USB, and USB-C, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and television reception.

CAUTIO
E: •
Do not bind the USB cable. It may trap heat and cause a fire.
•

Do not connect headphones to the monitor while you are wearing them. Depending on the volume
level, it may damage your ears and cause loss of hearing.



OTEE: • Adjustment of the volume control as well as the equalizer to other settings than the center position may
increase the ear-/headphones output voltage and therefore the sound pressure level.
•

Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor lowers the sound.
•

Incorrect cable connections may result in irregular operation, damage display quality/components of the LCD
module and/or shorten the module's life.
SENS/MEM
Headphone
USB
Downstream
(Type-A)
USB hub information
USB devices
e.g. Mouse
(USB hub
(Type-A) input select)
(Type-A)
(Type-A)
USB Downstream port
English−17
Cap
USB Upstream
USB1 USB2 USB-C
DisplayPort1 DisplayPort2
USB USB DisplayPort
Type-C
Computers
USB1
(USB 3.1 Gen 1, Type-B)
USB2
(USB 3.1 Gen 1, Type-B)
USB-C
(Type-C)
USB Upstream port
HDMI1 HDMI2 LAN
Mini- HDMI LAN
DisplayPort