Table of Contents
Advertisement
OSD Setup
OSD Setup Menu
Language
OSD Turn Off
System Setup
System Setup Menu
Auto Adjust (Analog input only)
Auto Contrast (Analog input only)
FACTORY PRESET
Extra
Extra Menu
Input Select
Audio Mute
Audio Volume
DDC/CI
OSD arning
OO SINOALN This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there
is a change of input signal, the "OO SINOAL" window will appear. The message will close automatically.
OUT OF RAONEN This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned
on, or there is a change of input signal, or if the video signal doesn't have proper timing, the "OUT OF RAONE" message will
appear. To close the message, please disconnect signal cables.
This operation might increase power consumption. Do you want to continue?N This function notifies of the increase in
power consumption. The message appears when adjusting [DV MODE], [Brightness], or [ECO MODE] settings.
To change the setting, select [Yes] in the message window and press the Right key.
To return without changing, select [No] in the message window and press the Left key.
Selects the language used by the OSD.
The OSD menu will stay open as long as it is in use. You can select how long the monitor waits after the
last touch to close the OSD menu. The preset choices are 5 - 120 seconds by 5-second increments.
[Left/Right], [Down/Up], [H.Size] and [Fine] are adjusted automatically when new timing is detected.
Adjusts the image displayed for non-standard video inputs.
Resets all OSD control settings back to the default settings except [Language].
Selects the input signal source.
Auto, DSUB, HDMI, DisplayPort.
Mutes the speaker or headphone output.
Controls the volume of the speakers or headphones.
Turns the [DDC/CI] function [On] or [Off].
English−34
Advertisement
Table of Contents
