Removing Power Switch - Dell OptiPlex XE3 Small Form Factor Service Manual

3 Install the:
a Heat sink fan
b Heat sink duct
c Hard drive and optical drive module
d HDD assembly
e Front bezel
f Side cover
4 Follow the procedure in
Power switch

Removing power switch

1 Follow the procedure in
2 Remove the:
a Side cover
b Front bezel
c HDD assembly
d Hard drive and optical drive module
3 To remove the power switch:
a Disconnect the power switch cable from the system board [1].
b Press the power switch retention tabs and pull the power switch out from the system [2] [3].
44 Disassembly and reassembly
After working inside your computer.
Before working inside your computer.