Installing The Coin-Cell Battery; Removing The Power-Switch Cable - Dell OptiPlex 3010 Small Form Factor Owner's Manual

Installing the Coin-Cell Battery

Installing The Coin-Cell Battery
1. Place the coin-cell battery into its slot on the system board.
2. Press the coin-cell battery downwards till it is secured.
3. Install the front bezel.
4. Install the cover.
5. Follow the procedures in
Related Links
Removing the Coin-Cell Battery

Removing the Power-Switch Cable

1. Follow the procedures in
2. Remove the cover.
3. Remove the front bezel.
4. Remove the drive cage.
5. Disconnect the power-switch cable from the system board.
6. Unthread the power-switch cable from the chassis clip.
7. Pry the power-switch cable away from the chassis.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
21