Allen-Bradley PanelView 1200 Series User Manual page 52

Chapter 2
PanelView 1200 Terminal Functions
2-22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Important If the User PROM is not installed, the test will indicate a
failure at memory location 5000:0000 for Series C and earlier terminals,
or at 4000:0000 for Series D and E terminals. This is normal.
Touch Panel (touch screen only) identifies touch cells that are difficult
to activate or inoperable. During this test, the display shows 119 touch
cells, in reverse video each with a distinct border on the inside of the
cell. The 120th cell is occupied by the Exit button. Each cell is tested by
pressing it. If the cell is working it changes to normal, then back to
reverse video when pressed a second time.
The following illustration shows the Touch Panel Test screen.
Function Keys identifies keypad terminal function keys that are
difficult to activate or inoperable. During this test, you'll see a display
of all the function keys. Test each function key by pressing it. If the
function key is working, the corresponding picture of the key will
change to reverse video. Press the key a second time to turn off the
reverse video.
Exit
20206