Table of Contents
Advertisement
Chapter 2
PanelView 1200 Terminal Functions
2-20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
If you toggle the Address Source to Manual but the current application
file has no Pass-Through configuration and a manual address has not
been configured and saved previously, the asterisks will be replaced by
the following defaults:
PLC Type:
Baud Rate:
Rack Number:
Starting Module
Rack Size
Last Chassis
Module Group:
High/Low Byte:
You must set the Module Group and High/Low Byte parameters to
match the Pass-Through Block Transfer assignment in the file you
intend to download using Pass-Through.
The Starting Module, Rack Size, and Last Chassis parameters enable
you to assign the terminal as one of the racks already configured in the
PLC scan list. When replacing an existing PanelView terminal with a
new one, you don't need to reconfigure the PLC before or after
Pass-Through Download.
When you set the Address Source to Manual and choose Save & Exit,
the terminal validates the Manual Address Source and saves the
Pass-Through rack assignment setting and that of Auto-Restart. The
terminal also invalidates the existing application file to ensure that the
new manual Pass-Through rack assignment does not conflict with
existing application file rack assignments.
PLC-5/25
57.6K
1
0
1/4
Yes
0
Low
Advertisement
Table of Contents
