Slc 5/02 Via 1747 Sn; 1771 Sn I/O Subscanner Module; 6008 Si Ibm Pc I/O Scanner; 6008 Sv Vme I/O Scanner - Allen-Bradley PanelView 1200 Series User Manual

Operator terminals

Table of Contents

Enlarged version

SLC 5/02 via 1747 SN

One or more PanelView 1200 terminals can be connected to the 1747-SN

I/O Subscanner Module (SLC–5/02 RIO connection) for the SLC–5/02

processor. Each module provides an additional remote I/O link for the host

programmable controller. The rack range of the 1747-SN is 0 to 3.

Important No block transfers are possible with the SLC-5/02 and 1747-SN

Series A module.

One or more 1771-SN I/O Subscanner Modules can be installed in any

standard Allen-Bradley 1771 I/O rack. Each module provides an additional

remote I/O link for the host programmable controller. One or more

PanelView 1200 terminals can be connected to any of the previously

mentioned processors along with other I/O racks via a 1771-SN I/O

Subscanner Module. Refer to the 1771-SN Sub I/O Scanner Module Data

Sheet for specific details.

This module can be installed in an IBM PCr or compatible computer to

provide the computer with an Allen-Bradley 1771 Remote I/O Link. You

can then connect Allen-Bradley Remote I/O racks and devices such as the

PanelView 1200 terminal to this computer.

This module can be installed in a VME backplane, providing the VME

controller with an Allen-Bradley 1771 Remote I/O Link. Allen-Bradley

Remote I/O racks and devices such as the PanelView 1200 terminal can

then be connected to this VME controller.

This module can be installed into a DEC Q-Bus controller to provide it

with an Allen-Bradley 1771 Remote I/O Link. Allen-Bradley Remote I/O

racks and devices such as the PanelView 1200 terminal can then be

connected to this controller.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Chapter 1

Introduction to PanelView 1200 Operator

Terminals

1-19

Table of Contents