Main Menu - Elcometer 456 3 Operating Instructions Manual

R
Note: If CAL softkey symbol is flashing the gauge
should be recalibrated. This is due to the calibration
adjustment method having been changed or a
probe change - see "Calibration adjustment" on
page 22.
Figure 11. Reading screen in extended mode
and showing full set of statistical values.
14

4.2 MAIN MENU

Gauge configuration and measurement functions
are controlled using menus (Figure 12). The
structure of the menus is shown on page 18.
Figure 12. Typical Elcometer 456
Some screens allow the status of a feature to be
changed e.g. on to off or select or deselect, etc. A
tick box indicates this type of feature. A tick
against a menu item indicates the function is
activated or selected.
SEL softkey selects the option displayed and in
some cases toggles the status of a tick box off/on.
Up/Down softkeys
menu item required. The menus scroll up/down and
a line across the screen indicates the start and end
of the menu.
Menu title
Menu contents
Softkey functions
3
menu
move the cursor to the