Storage And Transit; Maintenance - Elcometer 406L Operating Instructions Manual

R

9 STORAGE AND TRANSIT

This gauge incorporates a Liquid Crystal Display. If the display is heated above 50°C (120°F) it
may be damaged. This can happen if the gauge is left in a car parked in strong sunlight.
Always store the gauge in its case when it is not being used and during transit. If the gauge is to
remain unused for long periods of time, remove the batteries and store them separately.

10 MAINTENANCE

The Elcometer 406L Statistical Glossmeter is designed to give many years reliable service under normal
operating and storage conditions.
Regular calibration checks over the life of the gauge and the certified calibration tile are a requirement of
quality management procedures, e.g. ISO 9000, and other similar standards. The date of last certification
of the gauge is shown when the gauge is switched on. For checks and certification contact your local
Elcometer supplier.
The gauge does not contain any user-serviceable components. In the unlikely event of a fault, the
Elcometer 406L should be returned to your local Elcometer supplier or directly to Elcometer. The warranty
will be invalidated if the instrument has been opened. Contact details can be found on the outside cover of
these instructions, or on the Elcometer website, www.elcometer.com
10.1 MAINTAINING YOUR CALIBRATION TILE
The tile should be checked on a regular basis to ensure that it is clean and in good condition. If necessary
clean the tile using the cloth supplied.
22