Elcometer 456 3 Operating Instructions Manual page 18

R
EXTENDED MENU
Provides access to additional features. Toggle tick
box to activate/deactivate. See "Main MENU -
Extended menu on" on page 18.
ABOUT
Provides information on Gauge, Probe, Contact
information and Help (Figure 14):
GAUGE INFORMATION: Elcometer 456
software versions, etc.
PROBE INFORMATION: Probe type, range, etc.
CONTACT: Details of Elcometer offices worldwide
and, if programmed, the contact details for the
Supplier or Local Distributor.
HELP: Explains symbols used on Elcometer 456
display screens.
Figure 14. About menu
16
RESET
Selects Factory Calibration or Gauge resets. The
RESET menu option (Figure 15) allows one of three
gauge resets to be selected:
FACTORY CAL: Returns
settings created at time of manufacture of the
probe.
Factory calibration will not necessarily restore
3
model,
precise calibration values. The calibration of the
gauge should be adjusted before use, or at least
checked to ensure that it has been previously
adjusted correctly for the conditions of use.
INTL GAUGE
default settings e.g. DD/MM/YY date format and
3
metric units.
b. International settings can also be activated at switch
on. Press and hold softkey 3 and switch on gauge.
gauge
b
: Resets gauge to International
to calibration