Selecting A Language - Elcometer 456 3 Operating Instructions Manual

2.8 SELECTING A LANGUAGE

3
The Elcometer 456 has over 20 built-in languages.
When the gauge is switched on for the first time
after dispatch from the Elcometer factory the
display will show the language selection screen
(Figure 6).
Figure 6. Language selection screen
AT FIRST SWITCH ON
1. Press Up/Down softkeys to locate language
required.
2. Press SEL softkey to activate the selected
language.
The screen displays an Elcometer 456
welcome screen (Figure 4) followed by the
reading screen (Figure 5).
The gauge operates in the new language until
changed.
AT ANY TIME
1. Switch gauge off.
2. Press and hold left hand softkey.
3. Press key to switch on gauge.
The display will show language selection
screen with current language highlighted by
cursor.
4. Release left hand softkey.
Follow the instructions given above to select
the language.
Alternatively, select MENU/SETUP/LANGUAGES
- see "Main MENU - Extended menu on" on
page 18.
3
R
11