Installation And Connection; Installation Notes; Installation Steps; Ptz Installation - Honeywell HEIPTZ-2201W-IR User Manual

1080p hd network explosion-proof ptz camera with ir led
Table of Contents

Advertisement

3. Installation and Connection

This section focuses on the installation and connection of the PTZ.

Installation Notes

1.
2.
Protect the flameproof surface from damages, bump and scratches in the process of
installation, operation and maintenance.
3.
Make sure the interior and exterior of the PTZ is properly grounded.
4.
The obligate cable of the PTZ should be not shorter than 1m. The cable should be connected
with an explosion-proof junction box or the interior of the PTZ.
5.

Installation Steps

PTZ Installation

1.
In order to keep the safety of the personnel and the equipment, do not
attempt to open or disassemble the product.
Make sure that the PTZ is properly grounded!
Check the following items one by one before installation. Do not use the product
if the following requirements are not met.
Make sure the Ex certificate No. is in place;
Make sure the ex-marking is in line with the environment exposed to explosive
gas mixtures;
Make sure all the explosion-proof parts are free from crack and defect, which may
reduce the explosion-proof capacity;
Make sure the interior and exterior grounding is available.
Protection of the flameproof surface
Grounding
Obligate cable of PTZ
"DO NOT OPEN THE PTZ WHEN IT IS CHARGED"
Firstly, install the sun shields to the corresponding positions, as illustrated below.
Honeywell
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents