Table of Contents
Advertisement
4. Installation
4.3 Rating plate & warning label location
4.3.1. Rating plate
1
Sticker boiler vent rating
2
Rating plate
3
Sticker explanation rating plate
4
Sticker warning and instructions
The boiler rating plate on top of the boiler features the
boiler serial number and important boiler specifications,
for example the model and unit category. Other
instruction labels are affixed at the right side of the
boiler casing.
4.3.2. Minimum service clearances
•
Determine the ideal position for mounting the
boiler. Take into account the prevailing codes and
clearance requirements around the boiler.
•
When choosing the position for mounting the
boiler, bear in mind the authorised position of the
combustion gas discharge outlets and the air intake
opening.
•
To ensure adequate accessibility to the appliance
and facilitate maintenance, leave enough service
space around the boiler.
•
12"/300 mm on the right hand side of the boiler
is needed for reading warning and instruction
stickers.
WARNING
•
Mount the appliance to a solid wall capable of
bearing the weight of the appliance when full of
water and fully equipped.
•
It is forbidden to store flammable products and
materials in the boiler room or close to the boiler,
even temporarily.
MCA-Pro ISM Rv.4.1 2/2017
12
300mm
MCA Pro 45/65/90/115
1
CAUTION
•
The boiler must be installed indoors in a frost-
free environment.
•
A grounded electrical connection must be
available close to the boiler.
•
A connection to the drainage system for the
discharge of condensate must be available close
to the boiler. "Connecting the condensate
discharge pipe", page 31
2
3
4
15mm
300mm
19
Advertisement
Table of Contents
