Validation Of The Configuration; Check The User Language; Check Mirror-View Mode; Check The Height And Angle Of The Sensor Heads - ARCURE Blaxtair 3 Installation Instructions Manual

7

Validation of the configuration

To exit the configuration tool, click "exit". Changes are automatically saved.
The system will restart and test each component, then will display the
Blaxtair® view with your settings
7.1

Check the user language

•
Check that the warning notice displayed during the initialization is in
the correct user language.
7.2

Check mirror-view mode

•
Check that mirror-view mode matches the user's expectations when
the monitor displays the scene filmed by the cameras. (View of the
front : No mirror view, view behind the driver, mirror view activated)
7.3 Check the height and angle of the Sensor
Head(s)
•
When the screen displays the scene filmed by the head, left click.
on the top middle of the screen (see pictures) to access the
information
23/04/2019
SAVE AND QUIT THE CONFIGURATION
65/71