Table of Contents
Advertisement
On an MR90-A system, both Sensor Heads cannot operate at the same time.
Check "detection if input 1 is active" for one, the other one is automatically
positions, and consistency between head positioning and detection
activation must be verified. If during testing they are back to front (e.g. front
in reverse), the settings themselves must be inverted using the simple setup
Swapping
the two
SHs
23/04/2019
"detection all the times", and vice versa. This determines the head
function and by swapping the two Sensor Head's serial numbers.
50/71
Hide quick links:
Advertisement
Table of Contents
