Selecting The Configuration Model - ARCURE Blaxtair 3 Installation Instructions Manual

2.3
The configuration models available for operational use are as follows:
•
•
•
•
Configuration
selection's
button
23/04/2019

Selecting the configuration model

For a system composed of a Processing Unit and a Sensor Head,
select model MR90.
For a system composed of a Processing Unit and two Sensor Heads
operating alternately based on the incoming signal via the green E1
wire, select model MR90-A.
For a system composed of two Processing Units and two Sensor
Heads select MR180.
For a bespoke Arcure-configured system: select the vehicle (brand
and model) specified in the system's delivery note.
38/71