ARCURE Blaxtair 3 Installation Instructions Manual page 19

•
Each camera connected corresponds to a trigger. For example, the
brown "Back" trigger corresponding to the "Back" camera and can
be connected to the vehicle's reversing system so as to display the
image from the "Back" camera when the machine is put into reverse
gear.
•
If no triggers are connected, the monitor remains in standby mode.
For the monitor to display the camera view without a trigger, you will
need to select a setting with the remote control.
•
After removing the protective plastic tab from the remote control
press the « menu » button and you will see the image below :
23/04/2019
19/71