Table of Contents
Advertisement
3.11.3 Physical features of the detection zones
If, after modification, the physical characteristics of the detection zones are
not respected, the tool can detect this and warn the installer by pointing out
possible inconsistencies.
In this case, refer to section
3.9.3.1 and .2
to resolve these inconsistencies.
The tool provides configuration assistance. However, it is not designed to
detect all possible inconsistencies. The operator defining the configuration
remains responsible for the validity of the configuration and must verify at
the end of the adjustment phase that it is operational.
23/04/2019
53/71
Hide quick links:
Advertisement
Table of Contents
