•
No part of the machine shall obstruct the field of view.
•
The Blaxtair® head must not have a slope angle (angle « z »,°) when
mounted. Maximum tolerance is of +/- 2°.
•
The Blaxtair® head must not be exposed to
o
o
o
•
The Blaxtair® Sensor Head must not be installed:
o
o
o
o
•
The cables between the Sensor Head and Processor must not be
routed near to any component heating to above 70 °C. e.g. exhausts
•
The Sensor Head cables should never be connected or disconnected
when the Processor is turned on.
23/04/2019
impacts
corrosive elements
miscellaneous projected matter (mud, gravel, tarmac, etc.)
onto a vibrating component or on a mounting that increases
vibrations, etc.
onto a moving part of the machine: the height and angle of
the Blaxtair® Sensor Head must remain consistent
onto a fragile mount (thin metal plate, etc.)
immediately next to a very hot component
12/71