Table of Contents
Advertisement
6.3
LED (option) BXT-LED
The LED must be installed in accordance with the following
requirements:
•
The LED must not be in the driver's direct line of
vision, it should be installed in their peripheral
vision;
•
The LED must be installed in such a way that it does not reflect in
the windscreen, as it could disturb the driver, especially at night;
•
Use a 40mm hole saw to mount the LED;
•
Route the cable through the lock nut, then connect the LED to the
Processor's USB port. In the case of an MR180, the LED can be
connected to either one of the Processors;
•
When connecting the mini USB cable, a slight « click » will indicate
that the mini USB is properly connected.
A mini USB-USB cable is provided with the LED, do not add any extension,
this may cause the LED not to work.
23/04/2019
21/71
Hide quick links:
Advertisement
Table of Contents
