8.
The operation will take 1 to 5 min, depending of the original format of
the key. The editor cannot be closed during this operation (exit icon
unavailable)
9.
The completion of the copy will be shown by a window :
10. The USB key can be disconnected and used in another Processing
Unit.
5.3
To install the configuration into another PU
1.
To install the configuration into another Processing Unit, Power up
the system then simply connect the USB key to the Processing Unit
to be configured.
2.
The key will be automatically recognized. The success of the
operation will be shown after few seconds by this window:
23/04/2019
61/71