The detection zones are described by the x and y coordinates of their four
corners, shown by the green dots. Adding additional points is not possible on
this interface; this option can be performed by Arcure only via a special
configuration.
3.11.2 Changing the detection zones shape and size
By (left) clicking
of the points outlining the zone will appear on the left of the screen.
The detection zones can be changed by moving the points and/or segments
using the mouse in the outlined area, or by changing their coordinates in the
text fields on the left of the screen.
Changing the
detection
zone
coordinates
23/04/2019
the detection zones in the outlined area, the coordinates
52/71