Table of Contents
Advertisement
•
Checked by default, this enables the display of the
Blaxtair scene in mirror mode. Uncheck if the
Blaxtair head « looks » in the same direction as
the driver
Negative angle and actual height of the head with
respect to the ground.
Spatial position and orientation of the machine.
The machine's point
« 0 »
is located on the top left
of the image
180°= head facing backwards
0°= head facing forwards
The alarm settings can be adjusted to determine
under wich conditions the driver will be alerted in
connection with the input « E1 »
System optional add-ons. These optional add-ons
enable detection of the machines environnement.
•
3.8
When this mode is activated, the image displayed on screen is flipped to
simulate the reflection in a mirror. This mode is recommended when the
camera is filming the scene behind the operator. This way, when the driver is
sitting in front of the monitor with his back to the Blaxtair® Sensor Head, what
is on his left appears on the left of the screen etc.
•
23/04/2019
Adjust each setting in accordance with the recommendations.
To configure an MR90-A, perform the steps for each Sensor Head.
Rear-view mirror mode
In the highlighted zone, click on the Sensor Head, then, in the left-
hand area showing the Sensor Head properties, check/uncheck the
box « rear-view mirror view » to activate/deactivate rear-view mode.
46/71
Hide quick links:
Advertisement
Table of Contents
