Table of Contents
Advertisement
BA SineDrive User's Manual
The 5 Volt connection on COM port is for the hand held terminal and is a non-
standard connection.
The baud rate is 9600, no parity, one stop bit.
5.2.3. LED Status Indicators
The BAS contains two LED's located on the front of the unit that indicate the fault status
of the unit, refer to Figure 5-1. One of the LED's indicates if power is applied to the unit,
the second indicates the status of the amplifier. A green light indicates the amplifier is in
the ready state and the motor is enabled, while a red light indicates a fault or the power
stage is disabled.
Version 1.4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Aerotech, Inc.
Technical Details
5-5
Advertisement
Table of Contents
