Ricoh 3800C Operating Instructions Manual page 76

Registering
Editing a destination
programmed in a Group
A Press [Change] for the destina-
tion you want to edit.
The name of the destination is
displayed under the fax number
i f t h e d e s t i n a t i o n i s p r o -
grammed with the Quick Dial
Table.
3
Note
❒ If the destination you require
is not shown, press [U U U U Prev.]
or [T T T T Next].
B Edit the destination using the
number keys or destination
key.
Note
❒ If the destination is pro-
grammed with the number
keys, press [Clear] or the
{ { { { Clear/Stop} } } } key and enter the
fax number of the destina-
tion.
72
❒ If the destination is pro-
grammed with the Quick
D i a l T a b l e , p r e s s t h e
{ { { { Clear/Stop} } } } key or [Clear] to
cancel programming, and
then program with the desti-
nation key again. You can
cancel programming also by
pressing the destination key.
❒ Press [Adv. Features] to edit
SUB, SID, SEP, PWD, sub-ad-
dress or UUI. ⇒ Chapter 4,
"Advanced Features" in the
Advanced Features manual
❒ You can select a line type for
each destination when the
optional ISDN Unit or the
optional Extra G3 Interface
Unit is installed. Press [Select
line] to select a line type. ⇒
Chapter 4, "Changing the
Line Type" in the Advanced
Features manual
❒ To edit another destination,
press [Dest. List] and proceed
from step A.
Adding destinations
A Press [Add].