Table of Contents
Advertisement
Equipment Symbols
Revision L
Introduction: Equipment Symbols
The following symbols may appear on the product or its packaging.
Type BF equipment. The acquisition module is protected from defibrillation
shocks.
Alternating current.
Equipotential.
Charge the battery. The flashing amber LED next to this symbol indicates
you must connect the system to AC power to re-charge the battery.
LAN port for connecting an Ethernet cable with a standard RJ-45 jack.
Internal modem port for connecting a phone line with a standard RJ-11 jack.
Do NOT throw the battery into the garbage.
Recycle the battery.
Consult accompanying documents.
This position of the switch removes battery power from the equipment.
Classified with respect to electric shock, fire, mechanical, and other
specified hazards only in accordance with UL 60601-1, CAN/CSA C22.2
No. 601-1, CAN/CSA C22.2 No. 601-2-25, EN 60601-2-25, EN 60601-1-1,
IEC 60601-1-2: 2001.
To reduce the risk of electric shock, do NOT remove cover (or back). Refer
servicing to qualified personnel.
This symbol indicates that the waste of electrical and electronic equipment
must not be disposed as unsorted municipal waste and must be collected
separately. Please contact an authorized representative of the manufacturer
for information concerning the decommissioning of your equipment.
MAC™ 3500 Resting ECG Analysis System
2021337-036
1-7
Advertisement
Table of Contents
