Table of Contents
Advertisement
Revision L
Installation: General Assembly
3.
Route the cable around the trolley column towards the rear as shown below.
4.
At the front, hold the cable to the side so it clears the front panel as you replace
the panel.
5.
Plug the cable connector into port A then replace the back panel.
6.
Refer to the MAC 3500 Operator's Manual for information on using the
Magnetic Card Reader.
MAC™ 3500 Resting ECG Analysis System
2021337-036
Cable Routing
Rear View
34A
77A
70A
3-13
Advertisement
Table of Contents
