Legal Information; Signification Des Symboles - Otto Bock 7E7 Instructions For Use Manual

3.5 Technical information
Distal connection
Max. flexion angle
Weight of the joint
Weight of connection technology
System height
Material
Mobility Grade
Max. body weight

4 Legal information

All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
4.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip-
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.
4.2 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC for medical devices.
This product has been classified as a class I device according to the classification criteria outlined
in Annex IX of the directive. The declaration of conformity was therefore created by the manufac-
turer with sole responsibility according to Annex VII of the directive.

Signification des symboles

Mises en garde contre les éventuels risques d'accidents et de blessures graves.
AVERTISSEMENT
Mises en garde contre les éventuels risques d'accidents et de blessures.
ATTENTION
Mises en garde contre les éventuels dommages techniques.
AVIS
Autres informations relatives à l'appareillage / l'utilisation.
INFORMATION
INFORMATION
Date de la dernière mise à jour: 2016-01-28
• Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le produit.
• Respectez les consignes de sécurité afin d'éviter toute blessure et endommagement du produit.
• Apprenez à l'utilisateur à bien utiliser son produit et informez-le des consignes de sécurité.
• Conservez ce document.
7E7
Tube clamp
140°
340 g
280 g
33 mm
Titanium
2 + 3
100 kg
Ottobock | 17
Français