Valve Clearance - KYMCO Agility Carry 50i Manual

3
. INSPECTION/ADJUSTMENT

VALVE CLEARANCE

＊
Inspect and adjust valve clearance while
the engine is cold (below 35℃).
Remove the frame cover. (  2-3)
Remove the four bolts on the cylinder head
cover.
Remove the cylinder head cover. (  7-3)
Remove the cylinder head cover..
Turn the flywheel counterclockwise so that
the "T" mark on the flywheel aligns with the
index mark on the crankcase to bring the
round hole on the camshaft gear facing up to
the top dead center on the compression
stroke.
Inspect and adjust the valve clearance.
Valve Clearance: IN : 0.04mm
Loosen the lock nut and adjust by turning the
adjusting nut
Special
Tappet Adjuster
＊
 Check the valve clearance again after
the lock nut is tightened.
EX: 0.04mm
Agility Carry / Delivery 50i
Cylinder Head Cover
Bolts
Tappet Adjuster
Round Hole
Feeler Gauge
3-4