Table of Contents
Advertisement
DMX Values In-Depth (3-Channel Mode)
Channel
1
2
3
DMX Values In-Depth (1-Channel Mode)
Channel
1
Troubleshooting
Symptom
Fixture Auto-Shut
Off
Beam is Dim
No Light Output
No Power
Fixture Not Respond-
ing / Responding
Erratically
please open a support ticket at www.blizzardlighting.com/support.
TOURnado™ CSI COB User Manual Rev. C
Value
000 <--> 255
000 <--> 005
006 <--> 115
116 <--> 130
131 <--> 170
171 <--> 210
211 <--> 250
251 <--> 255
000 <--> 010
011 <--> 020
021 <--> 030
031 <--> 040
041 <--> 050
051 <--> 060
061 <--> 070
071 <--> 080
081 <--> 090
091 <--> 255
Value
000 <--> 255
Solution
Check the fan in the fixture. If it is stopped or moving slower than normal,
the unit may have shut itself off due to high heat. This is to protect the fixture
from overheating. Clear the fan of obstructions, or return the unit for service.
Check optical system and clean excess dust/grime. Also, the overheat protec-
tion mode (100%/80%/50% output) could be active. To check, see the LED
menu display reading at INFO>SOFT>POW.
Check to ensure fixture is operating under correct mode, IE DMX/Etc., if ap-
plicable.
Check fuse, AC cord and circuit for malfunction.
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).
If your problem isn't listed, or if problems persist,
What It Does
Dimmer (0% <--> 100%)
Strobe
No Function
Normal Strobe (Slow <--> Fast)
Random Strobe (Slow <--> Fast)
Electronic Sinewave (Slow <--> Fast)
Opening pulse(Slow <--> Fast)
Closing pulse (Slow <--> Fast)
No Function
32-Bit Dimmer
As set in the control menu display
Linear curve
Square law curve
Inverse square law curve
S-curve
Linear curve and smooth
Square law curve and smooth
Inverse square law curve and smooth
S-curve and smooth
Use the dimmer mode which menu had set up
What It Does
Dimmer (0% <--> 100%)
Page 13
© Copyright 2015 Blizzard Lighting, LLC
Advertisement
Table of Contents
