Edit Cpl Properties - GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 User Manual

4. PLAYBACK
A pop-up window will open up by clicking
editor
1
3
4
6
[Start Frame/Time]
1
[End Frame/Time]
2
[Subtitle Offsets]
3
[Start Cue]
4
[Blank time]
5
[Cue list]
6
User Manual for SR-1000 Standalone Integrated Media Block™

Edit CPL Properties

button (Edit Props) button on a clip in the playlist
Figure 9: Edit CPL Properties
Set the time code/frame number where playback of the clip starts.
Set the time code/frame number where playback of the clip ends.
Set the Top, Right, Bottom and Left values to adjust the position of
the subtitles projected.
Set an automation cue to execute before the clip begins.
Set the time interval between the end of the start cue and the start of
the clip playback.
Sets automation cues to execute during playback.
Select the cue from the dropdown list, enter the Frame/Time and
click the + Insert button.
- 19 -
2
5
7
th
September 15 , 2019