GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 User Manual page 30

5. AUTOMATION
1. If Coil is selected as the
Param
2. If Register or Level is selected as the
from the
of pins shown as enabled (right section). The user may select multiple pins (right
section) based on the number of pins selected (left section).
3
Click on the Save
User Manual for SR-1000 Standalone Integrated Media Block™
Action type, only one pin can be selected at a time from the
option:
Param option. The number of pins selected (left section) will be the number
button to add the new cue or click
Action type, multiple pins can be selected
Discard to remove.
- 29 -
th
September 15 , 2019