GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 User Manual page 92

9. APPENDIX Ⅰ
1
2
3
4
5
6
7
1 [Enable Synchronization]
2 [3D playback mode]
3 [Multicast group address]
4 [Server Mode]
User Manual for SR-1000 Standalone Integrated Media Block™
Figure 66: IMB Sync Configuration
Enable Synchronization
servers.
Select 3D playback mode
server can be configured to play either the left or right eye
frames or both for 3D content.
For example, the master server can be set to 'Play Left Eye', and
the slave server can be set to 'Play Right Eye'.
Set Multicast group address
Multicast group addresses can range from 224.0.0.0 to
224.0.0.254.
Note 1: Multicast group address
master and slave servers. The IMB Ethernet 1 ports on both
master and slave IMBs will use this setting for communication.
Note 2: If multiple sets of IMB sync systems are present in a
theater environment, the
IMB sync systems must be unique.
Select Master on the master server, and
server.
must be set on both master and slave
for the master and slave server. Each
for the master and slave server.
must be the same for both the
Multicast group address for each set of
Slave on the slave
- 91 -
th
September 15 , 2019