GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 User Manual page 67

7. CONFIGURATION
3
[CineCanvas]
Use RPL for SMPTE subtitles
Projector Network Timeout
Projector Blank Timeout
4
[Caption]
Preferred Language
Enable USL caption device
Maximum waiting time
5
6
7
User Manual for SR-1000 Standalone Integrated Media Block™
Send a SMPTE-compatible Resource Presentation List (RPL)
instead of an Interop-compatible Subtitle
Presentation List to the projector for CineCanvas subtitles. This
is only enabled when SMPTE subtitles are available for the CPL.
Timeout in seconds for communication with the projector.
Select the blank time of the projector during change of PCF or
format. This is to prevent noise when the PCF or format is
changed.
Select the preferred language for closed captions.
Enable communication with a closed caption device that
supports SMPTE 430-10 (USL CCE-100, etc.).
Note: the closed caption device must be configured to connect
to the SR-1000.
Specifies the maximum time to wait for the closed caption device
to report it is ready, before starting playback.
Figure 46: Playback Configuration (2)
- 66 -
th
September 15 , 2019