Set Cpl Audio Track Properties - GDC Standalone IMB SX-4000 User Manual

7. APPENDIX

7.4.2.2 Set CPL audio track properties

This feature allows the user to define audio track properties for each CPL in an SPL.
This can be done from SMS Playlist Management -> CPL Properties -> Audio tab.
Figure 153 CPL audio track properties setting
Audio track properties can be changed for each CPL if they are not detected correctly.
For example, if a CPL is known to contain 7.1 surround audio, change the 'Audio Channel
Configuration' setting to '7.1 surround'.
- 174 - SX-4000 Standalone Integrated Media Block™
September 26, 2016
User Manual