7. CONFIGURATION
5
6
7
8
5
[Network Configuration]
Subnet Mask
Gateway
IMB Ethernet 2
IMB Ethernet 1
Validate IP's
User Manual for SR-1000 Standalone Integrated Media Block™
Figure 62: System Configuration (2)
Specify the subnet mask.
Specify the network gateway for the SR-1000.
This is the main IP address of the SR-1000. The Web-UI interface can
be reached at this IP address.
Enable this to set up a secondary network on the SR-1000. This is
usually connected to a content management network. When it is
checked, IP address, Subnet Mask, Server Content IP can be set.
After setting the above network configurations, click
check the correctness of the IPs entered. A pop-up opens displaying
the result.
- 82 -
Validate IP's
to
th
September 15
, 2019